HSS Screw Slotting cutters
HSS/Dmo5 circular saw blades are used to cut slots for the screw knobs. These saw blades have tooth type A and are taper ground without an undercut. Although ordering with VAPO or other PVD coatings is an option, the standard modification is without a surface coating.
Circular saw blades for screw-slotting saws |
||||||||||||||
| Diameter (mm) |
Central hole (mm) |
Thickness/ Teeth Nr., Tooth form BW | ||||||||||||
| 0,7 | 0,8 | 0,9 | 1,0 | 1,1 | 1,2 | 1,3 | 1,4 | 1,5 | 1,6 | 1,7 | 1,8 | 2,0 | 80 | 22 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 100 | 22 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 125 | 22 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 | 64 |
HSS screw slotting saws in imperial sizes according norms ASA teeth AFTe. Used mainly for slotting screw heads. They are hollow ground for shallow cuts. Not recommended for deep cuts |
|||
| D (mm) | 1 3/4 | 2 1/4 | 2 3/4 |
| dH7 (mm) | 5/8 | 5/8 | 1″ |
| B (mm) | number of teeth | ||
| 0,006 | 90 | 60 | 72 |
| 0,008 | 90 | 60 | 72 |
| 0,001 | 90 | 60 | 72 |
| 0,012 | 90 | 60 | 72 |
| 0,014 | 90 | 60 | 72 |
| 0,016 | 90 | 60 | 72 |
| 0,018 | 90 | 60 | 72 |
| 0,02 | 90 | 60 | 72 |
| 0,023 | 90 | 60 | 72 |
| 0,025 | 90 | 60 | 72 |
| 0,028 | 90 | 60 | 72 |
| 0,032 | 90 | 60 | 72 |
| 0,035 | 90 | 60 | 72 |
| 0,036 | 72 | ||
| 0,04 | 90 | 60 | 72 |
| 0,045 | 90 | 60 | 72 |
| 0,051 | 90 | 60 | 72 |
| 0,057 | 90 | 60 | 72 |
| 0,064 | 90 | 60 | 72 |
| 0,072 | 72 | ||
| 0,075 | 90 | 60 | 72 |
| 0,081 | 90 | 60 | 72 |
| 0,091 | 90 | 60 | 72 |
| 0,102 | 90 | 60 | 72 |
| 0,114 | 90 | 60 | 72 |
| 0,128 | 72 | ||
| 0,144 | 72 | ||
| 0,162 | 72 | ||
| 0,182 | |||